User Errors; Input Signal Errors - Christie Mirage S+/HD/WU User Manual

• To see error messages displayed on-screen, select the Screen option
• To be notified via a serial communication only, select the RS-232 option.
• To receive both types of notifications, select All.
• To disable error messages (except for "invalid user key entry", which can't be hidden), select OFF.
NOTE: Text-based status/error messages also appear in the LCD Status Display window above the built-in
keypad at the rear of the projector. They are accompanied by their corresponding 2-digit error code
next to the built-in keypad, legible at a greater distance. Normal operation is indicated by the
"00"status code.
LED Status
Display window

3.12.1 User Errors

Invalid User Entry
A keypad entry not recognized by the projector triggers a short on-screen error message identifying the
problem. For example, if you specify a channel number that is not available, the message "Invalid Channel will
appear.
Or if you try to enter the wrong password, you'll see "Invalid Password". Press
message, and try again.
NOTE: On-screen display of "Invalid User Entry" messages cannot be disabled, even if Display Error
Messages has been set to "OFF".

3.12.2 Input Signal Errors

An input signal error message occurs if you are in presentation level (i.e., there are no menus present) and have
selected an input on which the projector detects a problem. While menus remain operational and any key press
will temporarily remove any displayed error message, you must resolve the signal problem in order to
permanently eliminate the message.
No Signal
The message "No signal" occurs when there is no source signal detected at the selected input, both HSYNC
and VSYNC are inactive, and the screen background is black. Connect or correct the signal, or try another
input.
Bad Sync
The message "Bad Sync" occurs when HSYNC or VSYNC are active , but the signal cannot be displayed. Such
a condition occurs when only 1 of the 2 sync signals is present, or when either sync signal is unstable or of the
wrong frequency. Correct the signal or select another input.
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-06 Rev. 1(04-2011)
Section 3: Operation
or to clear the
Exit
3-79