Christie Mirage S+/HD/WU User Manual page 127

NOTE: Show Blending Overlap appears as Reserved when Christie TWIST is installed.
Other Functions
For convenience, the Edge Blending submenu also includes related options for enabling a specific color and/
or test pattern, or for working with colors or the lamp. Such functions duplicate those provided elsewhere in
the Menu system.
Edge Blending Procedure
Before You Begin. Make sure your source hardware and/or software can
supply a tiled image for the number of projectors in use, and that the tiling
includes overlapping data of approximately 12.5-25% along shared edges
(see Figure 3-50). Tiling is not built into this model of projector.
Physically align the projectors and images from your intended external
source, then match colors and Brightness Uniformity.
IMPORTANT! For a shared edge, all Blend procedures and settings
1. Start with 2 full-screen projector images
overlapping by approximately 12.5-25%
each. Display a full white field test
pattern from both.
2. In the Edge Blending submenu, enable
the top check box to activate all controls.
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-06 Rev. 1(04-2011)
Figure 3-49 Overlap Example
should be identical on BOTH projectors.
Figure 3-50 Tiling Example
Figure 3-51 Edge Blending Submenu
Section 3: Operation
3-75