Specifying A Destination Using A One-Touch Button; Specifying A Destination Using The Keyboard Screen - Fuji Xerox ApeosPort-VI C7771 User Manualline

Fax

Specifying a Destination Using a One-Touch Button

You can use the one-touch buttons to specify recipients.
One-touch buttons correspond to the address numbers from 0001 to 0070, or 0001 to
0060.
For example, when the number you want to dial is registered to the address number 0001,
press one-touch button <1>.
Reference
Note
4
1
Press a one-touch button. Confirm that the recipient (fax number) specified with the one-
touch button is displayed on the touch screen.
Important
Note

Specifying a Destination Using the Keyboard Screen

You can specify recipients using the keyboard screen.
Important
1
Select the keyboard button.
236
For information on how to register address numbers, refer to "Tools" > "Setup" > "Add Address Book Entry" in the Administrator
Guide.
There are two ways in which address numbers and stored programs are assigned to the one-touch buttons.
Select either of the following. By default, [Type 1] is selected.
[Type 1]
The buttons 1 to 70 are used for address numbers and they correspond to the registered address numbers
0001 to 0070, while the buttons M01 and M02 are used for stored programs and they correspond to the
registered stored programs 1 and 2.
[Type 2]
The buttons 1 to 60 are used for address numbers and they correspond to the registered address numbers
0001 to 0060, while the buttons 61 to 70, M01, and M02 are used for stored programs and they
correspond to the registered stored programs 1 to 12.
The Large Size Color UI (optional) does not support the one-touch buttons.
The one-touch buttons have a sensor to detect which page of one-touch buttons (1 - 24, 25 - 48, or 49 - M02)
is currently opened. Before pressing a one-touch button, turn over the one-touch panel completely, and take
off your hand from the panel. Do not press the button while you are turning over the panel.
Do not place any objects near the one-touch buttons, nor spill any liquid over them.
To specify multiple recipients, press the one-touch buttons continuously.
Turn the one-touch panel over to press the one-touch buttons 25 and above.
When transmission to a certain recipient is prohibited in the System Administration mode, the keyboard
button cannot be used.