Specifying A Destination Using A One Touch Button; Specifying A Destination Using The Keyboard Screen - Fuji Xerox DocuCentre-IV C2263 User Manual

Note
The items displayed on the screen depend on the Address Book entry type. For more information on the setting items, refer
to "5 Tools" > "Setup" > "Add Address Book Entry" in the Administrator Guide.
10
When the settings are completed, select [Registered].
Note

Specifying a Destination using a One Touch Button

You can use the one touch buttons to specify recipients. One touch buttons correspond to
the address numbers from 0001 to 0052, or 0001 to 0045. For example, when the number
you want to dial is registered to the address number 0001, press one touch button <1>.
For information on how to register address numbers, refer to "5 Tools" > "Setup" > "Add Address Book Entry" in the
Administrator Guide.
Note
1
Press a one touch button. Confirm that the
recipient (fax number) specified with the one
touch button is displayed on the touch screen.
Important • The one touch buttons have a sensor to detect which page of one touch buttons (1 - 18, 19 - 36, or
Note

Specifying a Destination using the Keyboard Screen

You can specify recipients using the keyboard screen.
Important • When transmission to a certain recipient is prohibited in the System Administration mode, the [New
• To delete the input data and return to the [Fax Address Book] screen, select [Cancel].
• To return to the previous screen, select the [Back] button.
• There are two ways in which address numbers and stored programs are assigned to the one touch
buttons. Select either of the following. By default, [Type 1] is selected.
- [Type 1]
The buttons 1 to 52 are used for address numbers and they correspond to the registered address
numbers 0001 to 0052, while the buttons 53 and 54 are used for stored programs and they
correspond to the registered stored programs 1 and 2.
- [Type 2]
The buttons 1 to 45 are used for address numbers and they correspond to the registered address
numbers 0001 to 0045, while the buttons 46 to 54 are used for stored programs and they
correspond to the registered stored programs 1 to 9.
37 - 54) is currently opened. Before pressing a one touch button, turn over the one touch panel
completely, and take off your hand from the panel. Do not press the button while you are turning
over the panel.
• Do not place any objects near the one touch buttons, nor spill any liquid over them.
• To specify multiple recipients, press the one touch buttons continuously.
• Turn the one touch panel over to press the one touch buttons 19 and above.
Recipients] button cannot be used.
Fax/Internet Fax
4
One touch buttons
195