Specifying A Destination Using The Keyboard Screen - Fuji Xerox ApeosPort-II 7000 User Manual

2 Fax
Important • One touch buttons have sensors. The sensors recognize the address numbers from 001 to
Note
1
Press a one touch button. Confirm
that the recipient (fax number)
specified with the one touch button
is displayed on the touch screen.
Note
2

Specifying a Destination Using the Keyboard Screen

When the Additional G3 Port Kit (optional) is installed, you can set the line (port) and
send faxes. Local terminal information can be registered to each line. You can use a
line for your purpose.
For information on local terminal information, refer to "Local Terminal Information" (P.116).
Important • If certain recipients are prohibited in the System Administrator mode, [Keyboard] buttons
Note
1
Select [Keyboard].
2
Enter "<", "port number", ">", and
recipient's "telephone number" with
the keyboard that appears on the
touch screen.
Note
46
030, 031 to 060, and 061 to 070. Press a one touch button after turning over the one-touch
panel completely and removing your hand from the panel. Do not touch a one touch button
while you are turning over the panel.
• Do not put a label (such as a recipient label) to the one touch button panel or one touch
buttons.
• Take care not to place an object or spill liquid on or near the one touch buttons.
• Large Color Control Panel (Full Size Color UI) is not supported.
• One touch buttons correspond
to the address numbers from
001 to 070.
• Repeat this step to specify
multiple recipients.
• Turn the one touch button
panel over to press one touch
buttons 031 and above.
cannot be used.
• If the Additional G3 Port Kit (optional) is fitted on the machine, you can specify which line to
use to send fax. Local terminal information can be assigned to each line (port), so that each
line can be use to serve different purposes.
•When the Fax Server feature is used, a destination must be less than 50 characters long and
available characters are as follows:
0 to 9 Numeric characters
- Pause
# A starting character for a group number, which has been set on a fax server
\ A delimiter for private data. Using this character before and after private data
hides the destination string.
S A character for password verification
: DTMF signal
= A character to wait for dial tones
+ Available, but ignored
(Space) Available, but ignored
For more Information, refer to the documentation provided with Fax Server Kit.
001 002 003
016 017 018
004 005 006 019 020 021
007 008 009 022 023 024
010 011 012 025 026 027
013 014 015 028 029 030