Before Programming; Check Points; Preliminary Points; Section 2 Programming The System - NEC Electra Elite IPK Programing Manual

Document Revison 1
___________________________________________________________________________________
2.3
___________________________________________________________________________________
1 - 4
Table 1-1 Programming Modes (Continued)
Line
Mode Name
Key
LK 8 Special Mode

Before Programming

The technician should check the ROM version and the port numbers before
programming the system.
2.3.1

Check Points

Confirm the ROM Version
The available features depend on the ROM version. Refer to
Memory Block 8-1 (ROM Version Confirmation), or from any
idle Display Terminal, press
Confirm the Port Number
Port numbers are used for system programming. Refer to
Memory Block 7-1 (Card Interface Slot Assignment).
To confirm station numbers press
indicates the station number and the port number.
2.3.2

Preliminary Points

Select System Programming
Refer to
Line
Key
LK 1 ROM Version Confirmation
LK 2 System Speed Dial Memory Clear
LK 3 Station Speed Dial Memory Clear
LK 8 Second Initialization
A
S t a t i o n P o r t
N u m b e r N u m b e r
# # # = T E L X X
T I M E D I S P L A Y
Section 2 Programming the System on page 1-1
Submode Name
C
.
and
A
D
and . The display
Multiline Terminal Programming
Elite IPK
.