NEC Electra Elite IPK Programing Manual page 315

Document Revison 1
___________________________________________________________________________________
G
Programming Procedures
4 Press to write the data. The next Memory Block is displayed.
5 Program the next Memory Block or press
Related Programming
M.B. Number Memory Block Name
Trunk-to-Trunk Group Assignment
3-03
1-1-30 Route Advance Block Assignment
1-1-46, 47, 48 Access Code (1-, 2-, or 3-Digit) Assignment
1-10-00 Call by Call Type of Network ID Assignment
1-10-01 Call by Call ID Plan Assignment
1-10-02 Call by Call Type of Number Assignment
1-10-03 Call by Call Numbering Plan ID Assignment
1-10-04 Call by Call Network ID Assignment
1-10-06 Call by Call Facility Coding Value Assignment (Feature)
1-10-07 Call by Call Service Parameter Assignment
1-10-08 Call by Call Max Digit Assignment
1-10-09 Call by Call Simulated Facility Group Assignment
1-10-20 Call by Call Outgoing SFG Assignment
1-10-21 Call by Call Outgoing/ Incoming SFG Assignment
1-10-22 Call by Call Incoming Type Selection
1-13-03 Call by Call Service Selection
4-12 Line Key Selection for Telephone Mode
SW1 is a 4-position DIP switch on the PRT(1)-U( ) ETU that is used to select the desired application.
___________________________________________________________________________________
2 - 244
E
to go back on-line.
Notes
Elite IPK
Memory Blocks