NEC Electra Elite IPK Programing Manual page 692

Elite IPK
___________________________________________________________________________________
3.4
___________________________________________________________________________________
Programming Manual
Call by Call (CBC) Programming (LCR PC Software V2.0 or Higher)
3.4.1 The International/Operator Table
This table has a page for each LCR Class (1~4) that contains fixed
dialing patterns that can be assigned to that Class.
Two routes can be assigned and arranged in priority. PRT
should have higher priority.
Trunk Group or Route Advance Blocks are specified in TG/
RAB.
Delete digits specifies the number of digits to delete from the
first dial when using PRT.
PreDigits controls whether digits that are specified in pre-digit
tables are dialed before the International or Operator code.
When TG/RAB is not assigned, outgoing calls cannot be made.
International or Operator Table Example
LCR Class
Dial
1~4
0-
00
010
Class1
011
01N
ON
(N = 2~9)
3.4.2 The OCC Table
This Table has 16 pages (called Table 1~Table 16) that are required
for each of the LCR Classes for a total of 64 tables with fixed dialing
patterns.
Dial means following the OCC dial.
Two routes can be assigned and arranged in priority. PRT
should have higher priority.
Delete
Priority TG/RAB
Digits
RAB 09 1
1
2 None None
1 RAB 10 2
2 None None
1 RAB 11 3
2 None None
1 RAB 12 3
2 None None
1 RAB 13 2
2 None None
1 RAB 14 1
2 None None
Document Revision 1
PreDigits
Add/Not Add
Not Add
Not Add
Not Add
Not Add
Not Add
Not Add
Not Add
Not Add
Not Add
Not Add
Not Add
Not Add
3 - 39