Table A-1 Function Time Chart - NEC Electra Elite IPK Programing Manual

Function Time Chart
___________________________________________________________________________________
S 1 T
ECTION IME
The chart on the following pages provides a list of times that can be programmed in
the system. The information is listed numerically by Memory Block number. A brief
definition and Minimum, Default, and Maximum values are given for each time.
Time
Pause Time
Selection
DP Interdigit Time
Selection
Hookflash Time
Selection
Hold Recall Time
Selection
(Non-Exclusive
Hold)
Automatic Redial
Time Selection
Start Time Selection
___________________________________________________________________________________
Programming Manual
C
HART

Table A-1 Function Time Chart

Memory
Definition
Block
1-1-00 Time when no signal is being
sent to a CO/PBX line.
1-1-01 Minimum time between dialing
signals in Dial Pulse dialing.
1-1-02 Timing of a CO/PBX hookflash
from the Recall key of a
Multiline Terminal or a Single
Line Telephone to the CO/PBX
line.
1-1-03 The time before a held CO/PBX
line recalls the station that put
that line on hold.
1-1-04 Defines the redial timing
parameters when automatic
redial is set to a busy CO/PBX
number.
1-1-05 The time after dialing before
the system starts the elapsed
Call Time.
A p p e n d i x A
Value
Minimum Default
1.0s 3.0s
A B
20ms 600ms
25s 25s
Table 1 001 030
Table 2 001 060
Table 3 001 002
2s 10s
Maximum
3.0s
B
5.0s
∞
050 sec.
100 sec.
015
Attempts
70s
A - 1