NEC Electra Elite IPK Programing Manual page 44

Elite IPK
___________________________________________________________________________________
LK 1 System Mode
LK 1 CO Line (Continued)
Data
Memory Block Name
No.
21 DID Digit Conversion Assignment
22 DID Digit Conversion Table
23 DID Forward Station Number for
Busy Station or Undefined Digit
24 PBX/CTX Access Code Assignment
I
25 PBX/CTX Access Code Assignment
II
27 Automatic Day/Night Mode
Switching Time Assignment
28 Distinctive Ringing by Telephone or
CO Selection
29 Private Line Assignment
30 Route Advance Block Assignment
32 Automatic Day/Night Mode by Day
of Week Selection
33 Speed Dial Number/Name Display
Selection
34 Tie Line First Ring Pattern Selection
35 Speed Dial Buffer Allocation
37 Trunk Queuing Timeout Selection
46 Access Code (1-Digit) Assignment
47 Access Code (2-Digit) Assignment
48 Access Code (3-Digit) Assignment
49 Networking Trunk Group/Route
Advance Assignment
50 CO/PBX Outgoing Digit Add
Assignment
___________________________________________________________________________________
Programming Manual
Default Value
NO
T
NON
9–
8–
Not Specified
TEL
Not Specified
All Blocks 00
(Not Set)
CO/PBX Line LED
Off Pattern 1
(Sunday ~ Saturday)
DIAL
PAT3
100
10s
Refer to 1-1-46 Access Code (1-Digit) Assignment on page
Refer to 1-1-47 Access Code (2-Digit) Assignment on page
All Dial 000
(Not Used)
Not Specified
Not Specified
Document Revision 1
Programming Values
NO, YS
T (Station or Closed Number)
TN (Tenant)
NON, T (TEL), TN (Tenant)
Up to six digits (three numeric, three
pauses)
Up to six digits (three numeric, three
pauses)
Day/Night Mode Time (24-hour clock)
TEL, CO
CO/PBX Line Number, Tel Port Number
Priority of Trunk Group Number
Pattern 1, Pattern 2
DIAL, NAME
PAT1, PAT2, PAT3, PAT4, ICM, VOICE
100, 1,000 Memories
10s, 20s, 30s, 60s
N/A
101~132 (Trunk Group 01 ~ 32) or
201~216 (Route Advance Block 01 ~ 16)
10 digits max.
2-46.
2-51.
1 - 13