Calling Name Display Allow/Deny Selection; Centralized Billing Allow/Deny Selection; Centralized Billing - Point Code Of Center Office Assignment - NEC Electra Elite IPK Programing Manual

Document Revison 1
___________________________________________________________________________________
Related Programming (Continued)
M.B. Number Memory Block Name
1-15-10

Calling Name Display Allow/Deny Selection

1-15-11

Centralized Billing Allow/Deny Selection

1-15-12 Centralized Billing – Point Code of Center Office Assignment
1-15-13 Centralized Day/Night Switching for Remote Office Assignment
1-15-14 Centralized Day/Night Switching for Main Office Assignment
3-70 CIC Number Assignment
5-05 Common Signaling Channel Route Selection
1-1-05 Start Time Selection
1-5-02
SMDR Print Format
1-5-13
Printer Connected Selection
1-5-14
Printer Line Feed Control Selection
1-5-25
SMDR Valid Call Time Assignment
1-5-26 SMDR Incoming/Outgoing Print Selection
1-8-35 COM Port Baud Rate Setting Assignment
4-56 SMDR Telephone Print Selection
1. For Electra Elite IPK-to-Electra Elite IPK Network only one system can be set for Main. All other systems must
be set from Remote.
2. When connected to a PBX, the Electra Elite IPK must be set for REMOTE in this Memory Block.
3. When this Memory Block is set to NONE,
are allowed.
___________________________________________________________________________________
2 - 302
Notes
CCIS does not function even when all other
K-
Electra Elite IPK
CCIS Memory Blocks
K-
Memory Blocks