System Data List - NEC Electra Elite IPK Programing Manual

Document Revison 1
___________________________________________________________________________________
S 3 S
ECTION YSTEM
The System Data List is a complete list of Memory Blocks that are available in the
Elite IPK system. The information is organized by mode, submode, and then
numerically by Memory Block number. The Memory Block number and name, the
default values, and programming values are provided for each Memory Block.
LK 1 System Mode
LK 1 CO Line
Data
Memory Block Name
No.
00 Pause Time Selection
01 DP Interdigit Time Selection
02 Hookflash Time Selection
03 Hold Recall Time Selection
(Non-Exclusive Hold)
04 Automatic Redial Time Selection
05 Start Time Selection
06 CO/PBX Incoming Ringing Alarm
Time Selection
07 Tie Line Delay Ringing Time
Selection
09 Manual Pause Selection
11 System Transfer/Camp-On
Selection
12 Station Transfer/Camp-On Recall
Time Selection
13 CO Transfer Ring Pattern Selection
14 CO Transfer Ring Tone Selection
18 System Speed Dial Restriction by
Tenant
20 DID Digit Length Selection
___________________________________________________________________________________
1 - 12
D L
ATA IST
Default Value
3.0s
B
600ms
25s
Table 1: 030
Table 2: 060
Table 3: 002
10s
∞
(No Limit)
∞
(No Limit)
NO
YS
45s
C
A
CO/PBX Line LED
On
3
Programming Values
1.0s, 3.0s
Pattern A or B
20ms, 40ms, 60ms, 80ms, 100ms, 140ms,
160ms, 200ms, 400ms, 600ms, 800ms,
1.0s, 1.5s, 2.0s, 3.0s, 5.0s
25s, 45s, 60s, 90s, 120s, 180s, 240s,
(No Limit)
Table 1: 001 ~ 050 sec.
Table 2: 001 ~ 100 sec.
Table 3: 001 ~ 015 times
2s, 10s, 20s, 30s, 40s, 50s, 60s, 70s
∞
10s, 20s, 30s,
∞
10s, 20s, 30s,
NO, YS
NO, YS
25s, 45s, 60s, 90s, 120s, 180s, 240s,
(No Limit)
OFF, ON, A ~ H
A ~ H
LED On: Not Restricted
LED Off: Restricted
2, 3, or 4
Multiline Terminal Programming
Elite IPK
∞
∞