NEC Electra Elite IPK Programing Manual page 417

Document Revison 1
___________________________________________________________________________________
Related Programming
M.B. Number Memory Block Name
7-1 Card Interface Slot Selection
1-16-00 Auto Negotiation Yes/No Selection
1-16-01 Port Speed Selection – 10/100 Base T
1-16-02 Port Duplex Mode Selection
1-16-03 MDI/MDIX Mode Selection
1-16-04 VLAN Mode Selection
1-16-05 Default VLAN ID Assignment
1-16-07 High Priority RX Tag Assignment
1-16-08 High Priority TX Tag Assignment
1-16-09 Low Priority TX Tag Assignment
1-16-10 Port Mirroring Selection
1-16-11 Mirroring Source Port Assignment
1-16-12 Mirroring Target Port Assignment
1-16-13 VLAN Group to VLAN ID Assignment
VLAN Group and Port Selection
1-16-14
VLAN Tag Insertion Selection
1-16-15
Flow Control for Full Duplex Selection
1-16-16
Back Pressure for Half Duplex Selection
1-16-17
1. Only one HUB(8)-U( ) ETU can be assigned and installed for each cabinet.
2. In networks, QoS indicates that transmission rates, error rates, and other characteristics can be measured,
improved, and to some extent, guaranteed in advance. QoS is particularly important for continuous transmission
of high-bandwidth video, multimedia, and voice information.
3. The HUB(8)-U( ) ETU has two priority assignment methods: Port Based Priority (packet received) or Tag Based
Priority. Unknown Unicast Packets are always set for Low priority.
The Port Based Priority feature can assign priority of all packets except the Unknown Unicast Packets.
The priority of received packets is always that assigned by this Memory Block.
___________________________________________________________________________________
3 - 346
Notes
Elite IPK
Memory Blocks