NEC Electra Elite IPK Programing Manual page 390

Electra Elite IPK
___________________________________________________________________________________
Related Programming (Continued)
M.B. Number Memory Block Name
1-15-10 Calling Name Display Allow/Deny Selection
1-15-11 Centralized Billing Allow/Deny Selection
1-15-12 Centralized Billing – Point Code of Center Office Assignment
1-15-13 Centralized Day/Night Switching for Remote Office Assignment
1-15-14 Centralized Day/Night Switching for Main Office Assignment
3-70 CIC Number Assignment
5-05 Common Signaling Channel Route Selection
1-1-05 Start Time Selection
1-5-02
SMDR Print Format
1-5-13
Printer Connected Selection
1-5-14
Printer Line Feed Control Selection
1-5-25
SMDR Valid Call Time Assignment
1-5-26 SMDR Incoming/Outgoing Print Selection
1-8-35 COM Port Baud Rate Setting Assignment
4-56 SMDR Telephone Print Selection
1. When NO is selected, Link Reconnect does not take place.
2. When Local Loop/Ground Start Trunks are used, and a disconnect signal is not received from the network, the
time set in Memory Block 1-1-05 (Start Time Selection) applies for the reconnect to take place.
___________________________________________________________________________________
Programming Manual
Notes
Document Revision 1
2 - 319