NEC Electra Elite IPK Programing Manual page 234

Elite IPK
___________________________________________________________________________________
G
Programming Procedures (Continued)
4 Press to write the data.
5 Repeat Steps 3 and 4 for all buttons for each DSS. The next Memory Block is displayed.
6 Program the next Memory Block or press
Related Programming
M.B. Number Memory Block Name
1-6-01 Attendant Add-On Console to Telephone Port Assignment
7-2 Telephone Type Assignment
1. When TEL is assigned to a line key, the red LED is used to indicate Station Status.
2. When a function (e. g., Message or Paging) that does not require a green LED is assigned to a 2-color LED key,
the green LED does not function.
3. Telephone number setting data for telephone sets is determined by the number of installed ESI(8)-U( ) ETUs.
4. Message Waiting and Attendant Station Outgoing Lockout cannot be assigned on the same console.
5. DSS/CO keys should be programmed on line keys 1~48 only.
6. The Feature Access key with Live Record has seven features:
Feature No. Feature
00 Record Start
01 Record Pause/Restart
02 Record Erase
03 Record Finish
04 Record Erase/Restart
05 Pager
06 Record Confirmation
07 Live Monitoring
Each function can be assigned by dialing the Feature No. using the dial pad after pressing LK1 on page 3.
7. Digital Voice Mail Mailbox Number can be entered using two, three, or four digits of the Mailbox number on the
dial pad. This feature is used for Live Record addressing. The Live Record feature must be assigned to a line key
on the console also.
___________________________________________________________________________________
Programming Manual
E
to go back on-line.
Notes
Document Revision 1
2 - 163