Pc Programming Password Assignment - NEC Electra Elite IPK Programing Manual

Document Revison 1
___________________________________________________________________________________
1-8-17 PC Programming Password
Assignment
General Description
Use this Memory Block to assign system passwords that must be entered when
connecting to the system using SAT PC Programming.
Display
C l a s s
D a t a
N o .
1 , 2
N o .
1 7 : ( 1 ) =
T I M E
Programming Procedures
1 Go off-line.
A G
2 Press LK1 + LK8 +
3 Use the following to enter Class 1 (Technician Mode) and password (8 digits max.)
Use the following to enter data:
H
K I
~
t o enter numeric data
G
to clear data
4 Press to write the data and advance to Class 2 (End User Mode).
5 After entering Class 2 password, press
6 Program next Memory Block or press
1. Password 1 (Class 1) is used for Technician SAT PC Programming.
2. Password 2 (Class 2) is used for End User SAT PC Programming.
3. Password 1 (Class 1) can be assigned only by telephone programming. It cannot be assigned or changed by
Technician or End User SAT PC Programming.
4. Password 2 (Class 2) can be assigned by telephone programming or Technician SAT PC Programming. It
cannot be assigned or changed by End User SAT PC Programming.
5. Password 2 (Class 2) cannot be assigned until Password 1 (Class1) is assigned in the Memory Block.
6. The password for both classes can have up to five digits.
___________________________________________________________________________________
2 - 204
S e t t i n g
D a t a
D I S P L A Y
to access the Memory Block.
G
E
to write the data. The next Memory Block is displayed.
to go back on-line.
Notes
Electra Elite IPK
System Mode
1
Submode
8
Data No.
17
PC Programming
+CSP
Default Values
Class 1, 2 All Blank
Memory Blocks