Automatic Redial Time Selection - NEC Electra Elite IPK Programing Manual

Elite IPK
___________________________________________________________________________________
1-1-04

Automatic Redial Time Selection

General Description
When a called party is busy, the station user dials an Access Code and restores the
handset. Use this Memory Block to define the redial timing parameters when
automatic redial is set to a busy CO/PBX number. After the specified number of call
attempts with no answer, the system stops dialing.
Display
D a t a
N o .
0 4 : R E D I A L ( 1 )
T I M E
Programming Procedures
1 Go off-line.
K D
2 Press LK1 + LK1 +
3 Use the dial pad to enter the Data Setting for Table 1.
Use the following to enter data:
J
t o move the cursor left
L
t o move the cursor right
Setting Data (Allowed):
Table 1 (Calling Time):
Table 2 (Call Waiting Time):
Table 3 (Call Attempts):
G
000 cannot be entered.
4 Press to write the data and display the next table.
5 Repeat Steps 3 and 4 for each remaining table. After pressing
6 Program the next Memory Block or press
1. Definitions:
Calling Time: The time that the system automatically calls the busy CO/PBX number. After the programmed time
limit is reached, the call is abandoned.
Call Waiting Time: The time the system waits between call attempts.
Call Attempts: The number of times the system redials the busy CO/PBX number.
2. When Call Pickup groups are assigned using Memory Block 4-09 (Telephone to Tenant Assignment), the CO
lines must be assigned to the same Tenant group in Memory Block 2-01 (Trunk to Tenant Assignment) for this
feature to work.
___________________________________________________________________________________
Programming Manual
D a t a
T a b l e
T i t l e
1 ~ 3 S e t t i n g
0 3 0
D I S P L A Y
to access the Memory Block.
001~050 sec.
001~100 sec.
001~015 times
E
G
for Table 3, the next Memory Block is displayed.
to go back on-line.
Notes
Document Revision 1
System Mode
Submode
Data No.
PC Programming
Default Values
Table
Description
No.
1 Calling Time
2 Call Waiting Time
3 Call Attempts
1
1
04
+BM
Value
030
060
002
2 - 7