NEC Electra Elite IPK Programing Manual page 401

Document Revison 1
___________________________________________________________________________________
1-15-14 Centralized Day/Night Switching for
Main Office Assignment
General Description
Use this Memory Block to activate
Display
D a t a T a b l e
0 1 ~ 1 6
N o .
1 4 : T 0 1 :
T I M E
Programming Procedures
1 Go off-line.
A B
2 Press LK1 + LK15 +
3 Use dial pad keys to enter Table number, C-Channel, and Point Code.
Use the following to enter data:
J
t o move cursor left
L
t o move cursor right
K I
~ to enter numeric data
Point code range is 00001~16367.
G
Tables 01~16 can be assigned.
4 Press to write the data, and display the next Memory Block.
5 Program the next Memory Block or press
Related Programming
M.B. Number Memory Block Name
Card Interface Slot Assignment
7-1
MIF (LCR) Assignment
7-3-01
MIF (SMDR) Assignment
7-3-02
K-CCIS Main/Remote Office Selection
1-15-00
Common Signal Channel Data Speed Assignment
1-15-01
1-15-02 Common Signal Channel Assignment
1-15-03 Originating Point Code Assignment
1-15-04 Destination Point Code Assignment
1-15-05 Destination Point Code Transfer Assignment
___________________________________________________________________________________
2 - 330
CCIS by assigning a Main or Remote system.
K-
P o i n t
C - C h
C o d e
1 ~ 4
= 0
D I S P L A Y
to access the Memory Block.
E
to go back on-line.
Electra Elite IPK
System Mode
Submode
Data No.
PC Programming
Default Values :
All Tables Not Specified
Memory Blocks
1
15
14
+AW