Handlebars Removal And Installation - Suzuki AN400 Service Manual

Handlebars Removal and Installation

Removal
Remove the handlebar cover. Refer to "Handlebar Cover
Removal and Installation in Section 9D (Page9D-13)".
Left side
1) Remove the rear view mirror (1).
2) Disconnect the rear brake light switch lead wire
couplers (2).
3) Remove the rear brake master cylinder (3).
CAUTION
!
Do not turn the rear brake master cylinder
upside down.
4) Remove the left handlebar switch box (4).
5) Remove the handlebar balancer (5).
6) Remove the grip rubber (6).
5
6
Right side
1) Remove the rear view mirror (1).
2) Disconnect the front brake light switch lead wire
couplers (2).
3) Remove the front brake master cylinder (3).
CAUTION
!
Do not turn the front brake master cylinder
upside down.
B705H16206016
1
3
4
2
I705H1620001-01
4) Remove the right handlebar switch box (4).
5) Remove the handlebar balancer (5).
6) Remove the throttle grip (6).
3 3
2 2
Handlebar holder
1) Remove the handlebar clamp bolts (1).
2) Remove the handlebar holder (2).
3) Remove the handlebars (3).
CAUTION
!
Hold the handlebar by the hand to prevent
throw or drop out of the steering stem.
2
Steering / Handlebar:
1 1
6 6
5 5
4 4
I705H1620002-01
1
1
2
3
I705H1620003-03
6B-2