Exhaust System Inspection; Ho2 Sensor Inspection - Suzuki AN400 Service Manual

1K-4 Exhaust System:

Exhaust System Inspection

Inspect the exhaust pipe connection and muffler
connection for exhaust gas leakage and mounting
condition. If any defect is found, replace the exhaust
pipe or muffler with a new one.
Check the exhaust pipe bolts, exhaust pipe connecting
bolt and muffler mounting bolts are tightened to their
specified torque.
Tightening torque
Exhaust pipe bolt (a): 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Exhaust pipe connecting bolt (b): 23 N·m (2.3 kgf-
m, 16.5 lb-ft)
Muffler mounting bolt (c): 23 N·m (2.3 kgf-m, 16.5 lb-
ft)
5
(c)

HO2 Sensor Inspection

B705H11B06005
Refer to "HO2 Sensor Inspection in Section 1C
(Page1C-6)".
3
(a)
I705H11B0009-02
6
(d)
I705H11B0011-02
B705H11B06006