Repair Instructions; Parking Brake System (Brake-Lock System) Inspection; Parking Brake System (Brake-Lock System) Removal And Installation - Suzuki AN400 Service Manual

4D-7 Parking Brake:
Parking Brake System (Brake-lock System)
Inspection
Refer to "Parking Brake (Brake-lock) Inspection in
Section 0B (Page0B-20)".
Parking Brake System (Brake-lock System)
Removal and Installation
Refer to "Rear Brake Caliper Removal and Installation in
Section 4C (Page4C-3)".
Parking Brake System (Brake-lock System)
Disassembly and Assembly
Refer to "Rear Brake Caliper Disassembly and
Assembly in Section 4C (Page4C-4)".
Parking Brake Cable (Brake-lock Cable)
Removal and Installation
Refer to "Parking Brake Cable (Brake-lock Cable)
Routing Diagram (Page4D-6)".
Removal
1) Remove the front box. Refer to "Front Box Removal
and Installation in Section 9D (Page9D-18)".
2) Loosen the brake-lock nut (1), remove the brake-
lock cable (2).
3) Remove the brake hose clamp.

Repair Instructions

B705H14406001
B705H14406002
B705H14406003
B705H14406004
1
2
I705H1440001-02
I705H1440002-05
4) Remove the lock-nut (3) and remove the brake-lock
arm (4).
5) Remove the brake-lock cable. Refer to "Parking
Brake Cable (Brake-lock Cable) Routing Diagram
(Page4D-6)".
Installation
1) Install the brake-lock cable. Refer to "Parking Brake
Cable (Brake-lock Cable) Routing Diagram
(Page4D-6)".
2) Assembly the brake-lock cable (1) to brake-lock arm
(2), install the lock-nut (3). Refer to "Rear Brake
Caliper Removal and Installation in Section 4C
(Page4C-3)"
2
4
3
I705H1440003-01
1
2
3
I705H1440004-01