9E-3 Body Structure:
Side-stand Removal and Installation
Removal
1) Support the motorcycle with the center stand.
2) Remove the side-stand. Refer to "Side-stand Construction (Page9E-2)".
Installation
Install the side-stand. Refer to "Side-stand Construction (Page9E-2)".
Center Stand Construction
1
1. Center stand
2. Center stand inner spring
3. Center stand outer spring
4. Frame
4
3
2
5. Cushion
"a": 60 mm (2.36 in)
"b": 57 mm (2.24 in)
"c": 60 mm (2.36 in)
(a)
5
"a"
"b"
"d": 57 mm (2.24 in)
: 50 N⋅m (5.0 kgf-m, 36.0 lb-ft)
: Apply grease to sliding surface.
B705H19506016
B705H19506017
" c "
" d "
I705H1950002-03