Front Brake Pad Inspection; Front Brake Pad Replacement - Suzuki AN400 Service Manual

Hide thumbs Also See for AN400:
Table of Contents

Advertisement

Front Brake Pad Inspection

The extent of brake pad wear can be checked by
observing the grooved limit line "A" on the pad. When the
wear exceeds the grooved limit line, replace the pads
with the new ones. Refer to "Front Brake Pad
Replacement (Page4B-2)".
CAUTION
!
Replace the brake pad as a set, otherwise
braking performance will be adversely
affected.

Front Brake Pad Replacement

Replace the front brake pads in the following
procedures:
CAUTION
!
Do not operate the brake lever while
removing the caliper.
1) Loosen the front brake pad mounting pins (1).
2) Remove the front brake caliper mounting bolts (2).
3) Remove the front brake caliper.
1
B705H14206004
"A"
I705H1420001-02
B705H14206005
2
I705H1420002-01
4) Remove the front brake pad mounting pins.
5) Remove the front brake pads.
6) Disassemble the shims from the front brake pads.
7) Clean up the caliper especially around the caliper
piston and the shim.
8) Assemble the new front brake pads and shims.
CAUTION
!
Replace the brake pads as a set, otherwise
braking performance will be adversely
affected.
Front Brakes:
4B-2
I705H1420003-02
I705H1420004-01
I705H1420005-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents