Suzuki AN400 Service Manual page 104

1A-41 Engine General Information and Diagnosis:
Step
2 1) Turn the ignition switch OFF.
2) Measure the IAT sensor resistance.
IAT sensor resistance
Approx. 2.58 kΩ at 20 °C (68 °F) (Terminal – Terminal)
Special tool
(A): 09900–25008 (Multi-circuit tester set)
Tester knob indication
Resistance (Ω)
Is the resistance OK?
Intake Air Temp.
0 °C (32 °F)
20 °C (68 °F)
40 °C (104 °F)
80 °C (140 °F)
Action
(A)
I705H1110027-03
Resistance
Approx. 6.54 kΩ
Approx. 2.58 kΩ
Approx. 1.14 kΩ
Approx. 0.54 kΩ
Yes
• B/Bl or B/Br wire
open or shorted to
ground, or poor (25)
or (4) connection.
Refer to "Terminal
Alignment of ECM
Coupler (Harness
Side) (Page1A-5)".
• If wire and
connection are OK,
intermittent trouble or
faulty ECM.
• Recheck each
terminal and wire
harness for open
circuit and poor
connection.
• Replace the ECM
with a known good
one, and inspect
again.
No
Replace the IAT sensor
with a new one.