Special Tools And Equipment; Special Tool; 1C-7 Engine Electrical Devices; Ho2 Sensor Inspection - Suzuki AN400 Service Manual

1C-7 Engine Electrical Devices:

8) Install the upper meter panel. Refer to "Upper Meter
Panel Removal and Installation in Section 9D
(Page9D-13)".

Service Data

FI Sensors
Item
ECT sensor resistance
IAT sensor resistance

Tightening Torque Specifications

Fastening part
ECT sensor
IAT sensor mounting screw
Reference:
For the tightening torque of fastener not specified in this section, refer to "Tightening Torque Specifications in Section
0C (Page0C-7)".

Special Tool

09900–25008
Multi-circuit tester set
(Page1C-3) / (Page1C-
5)
09930–11950
Torx wrench
(Page1C-6)

HO2 Sensor Inspection

Inspect the HO2 sensor. Refer to "DTC "C44" (P0130,
P0135): HO2 Sensor (HO2S) Circuit Malfunction in
Section 1A (Page1A-64)".

HO2 Sensor Removal and Installation

Refer to "Heated Oxygen Sensor (HO2S) Removal and
Installation in Section 1B (Page1B-4)".

Specifications

Specification
Approx. 2.58 kΩ at 20 °C (68 °F)
Approx. 2.58 kΩ at 20 °C (68 °F)
N⋅m
12
3.5

Special Tools and Equipment

09900–25009
Needle pointed probe set
(Page1C-5)
09930–82720
Mode select switch
(Page1C-2) /
6)
Tightening torque
kgf-m lb-ft
1.2 8.5
0.35 2.5
(Page1C-
B705H11306020
B705H11306021
B705H11307002
Note
B705H11307003
Note
(Page1C-3)
(Page1C-4)
B705H11308001