Rear Wheel Assembly Removal And Installation - Suzuki AN400 Service Manual

Rear Wheel Assembly Removal and Installation

Refer to "Exhaust Pipe / Muffler Removal and Installation
in Section 1K (Page1K-2)".
Refer to "Rear Brake Caliper Removal and Installation in
Section 4C (Page4C-3)".
Removal
1) Remove the helmet box front cover. Refer to "Helmet
Box Front Cover Removal and Installation in Section
9D (Page9D-16)".
2) Disconnect the HO2 sensor lead wire coupler (1).
3) Remove the exhaust pipe connecting bolt (2).
4) Remove the muffler (3).
B705H12406025
1
I705H1240016-02
2
I705H1240017-01
3
I705H1240018-01
5) Remove the rear brake hose clamps (4) and rear
brake caliper (5).
4
5
6) Remove the rear swingarm mounting bolts (6), rear
axle nut (7) and remove the rear swing arm (8).
7
8
7) Remove the inner color (9) and the rear wheel (10).
CAUTION
!
Do not operate the brake lever while
removing the rear wheel.
Wheels and Tires: 2D-9
I705H1240019-02
6
I705H1240021-01
9
10
I705H1240020-01