Suzuki AN400 Service Manual page 337

• Install the oil seal (3) and bearings (4) using the
special tool.
CAUTION
!
• Replace the O-ring with a new one.
• Replace the bearings with the new ones.
• Install the bearing so that its stamped mark
faces outside.
Special tool
(A): 09913–70210 (Bearing installer set)
• Apply the grease to the oil seal lip.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
(A)
3
• Install the bearing retainer (5).
5
(A)
4
I705H1310024-01
I705H1310025-02
Drive Chain / Drive Train / Drive Shaft:
Final gear cover
• Install the bearings (1), (2) and (3) using the special
tool.
CAUTION
!
• Replace the bearing with a new one.
• Install the bearing so that its stamped mark
faces outside.
Special tool
(A): 09913–70210 (Bearing installer set)
1
2
• Install the oil seal (4) using the special tool.
CAUTION
!
Replace the oil seal with a new one.
Special tool
(A): 09913–70210 (Bearing installer set)
• Apply the supper grease to the oil seal lip.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
(A)
4
3A-7
(A)
3
I705H1310027-01
I705H1310028-02