Suzuki AN400 Service Manual page 183

Speed Sensor
Remove the speed sensor (1).
1
Drivetrain
1) Remove the inner clutch cover (1).
2) Remove the dowel pins and gasket.
3) With the crankshaft held immovable, remove the
fixed drive face nut and concaved washer.
4) Remove the fixed drive face (2).
I705H1140077-01
1
I705H1140078-01
I705H1140079-01
2
I705H1140080-01
5) With the clutch housing held immovable using the
special tool, remove the clutch housing nut and
concaved washer.
6) Remove the clutch housing (3).
Special tool
(A): 09930–40113 (Rotor holder)
(A)
7) Remove the drive V-belt (4) and clutch shoe/
movable driven face assembly (5).
4
8) Remove the movable drive face assembly (6) with
the spacer (7).
6
9) Remove the final gear assembly. Refer to "Final
Gear Assembly Removal and Installation in Section
3A (Page3A-3)".
Engine Mechanical: 1D-39
3
I705H1140081-01
5
I705H1140082-01
7
I705H1140083-02