Schematic And Routing Diagram; Ignition System Diagram - Suzuki AN400 Service Manual

1H-2 Ignition System:
NOTE
If the indicator light flashes fast, turn the
ignition switch OFF then ON to make
judgment again as there is possible
misjudgment due to environmental radio
interference.
CAUTION
!
When the battery performance is lowered in
winter (low temperature), the system may at
times makes a re-judgment at the time of
beginning the starter motor operation. In this
case, the indicator light operation starts
immediately after the starter operation.

Ignition System Diagram

CKP
sensor

Schematic and Routing Diagram

ECM
TP ECT
sensor sensor
1
NOTE
In the case that the LED flashes fast, remains
lit or unlit, the probable cause of such a
failure may be due to abnormal condition in
the key, key cylinder, wiring harness or ECM.
(If such a failure exists, contact your
distributor or dealer.)
Engine
stop switch
lgnition coil
I705H1180007-01
B705H11802001
Turn signal/
Side-stand relay
lgnition fuse
lgnition switch
Main fuse
Battery
I705H1180008-04