Front Box Removal And Installation - Suzuki AN400 Service Manual

Front Box Removal and Installation

Removal
1) Remove the lower leg shield and front frame cover.
Refer to "Lower Leg Shield Removal and Installation
(Page9D-16)" and "Front Frame Cover Removal and
Installation (Page9D-17)".
2) Remove the ambient temperature sensor (1) from
the front box.
1
3) Remove the ECM (2) from the front box.
B705H19406017
I705H1940030-02
2
I705H1940032-02
Installation
Install the front box in the reverse order of removal.
4) Remove the front box inner cover (3) and disconnect
the power terminal coupler (4).
3
5) Remove the front box (5) by removing the screws
and bolts.
Exterior Parts: 9D-18
4
I705H1940033-02
I705H1940034-01
5
I705H1940035-02