Download Print this page

Rear Fairing Disassembly; Rear Central Cowling Disassembly - APRILIA RS 250 Service And Repair Manual

Aprilia rs 250 motorcycle service and repair manual
Hide thumbs Also See for RS 250:

Advertisement

CHASSIS

REAR FAIRING DISASSEMBLY

Disassemble the passenger's seat.
Remove the four screws 010.
Remove the two screws 020.
Remove the two screws 030.
Remove the rear fairing from the rear of the
motorcycle, carefully widening the bottom part
to release it from the passenger seat lock.
Disconnect tail light connector 040.
REASSEMBLY
Perform the disassembly operations in reverse or-
der, being careful not to widen the lower part of
the rear fairing excessively.

REAR CENTRAL COWLING DISASSEMBLY

Disassemble the driver's seat.
Disassemble the passenger's seat.
Disassemble the rear fairing.
Disassemble the four screws
which fasten the rear part of the chassis.
Remove the rear central cowling from above.
REASSEMBLY
Perform the disassembly operations in reverse or-
der, being careful to centre the bushes correctly
over the four fastening screws.
Fully tighten the screws which fasten the rear part
of the chassis.
010
and bushes
CHASIS
DESMONTAJE DEL CARENADO TRASERO
Desmontar el sillín del pasajero.
Sacar los cuatro tornillos 010.
Sacar los dos tornillos 020.
Sacar los dos tornillos 030.
Extraer el carenado trasero de la parte trasera
de la motocicleta, ensanchando con cuidado la
parte inferior para soltarlo de la cerradura del
sillín del pasajero.
Desconectar el conector
REMONTAJE
Realizar en sentido contrario las operaciones del
desmontaje, teniendo cuidado en no ensanchar
excesivamente la parte inferior del carenado trase-
ro.
DESMONTAJE DEL CARENADO CENTRAL
TRASERO
Desmontar el sillín del piloto.
Desmontar el sillín del pasajero.
Desmontar el carenado trasero.
Desmontar los cuatro tornillos
squillos correspondientes que fijan también la
parte trasera del chasis.
Extraer por arriba el carenado central trasero.
REMONTAJE
Realizar en sentido contrario las operaciones de
desmontaje, teniendo cuidado en centrar correcta-
mente los casquillos en los cuatro tornillos de fija-
ción.
Apretar a tope los tornillos que fijan también la
parte trasera del chasis.
7 - 8
040
del faro trasero.
010
y sus ca-

Hide quick links:

Advertisement

Chapters

loading