Inserting And Removing Memory Cards - Alaxala AX6300S Series Instruction Manual

4. Installing a Switch

4.8 Inserting and removing memory cards

To use a memory card, insert it in the management and switching unit.
CAUTION
(1) Inserting a memory card
Insert a memory card into the slot until you hear a click, and then remove your
fingers slowly. (Hold the memory card with the cut-off corner to the right.)
Figure 4-35 Inserting a memory card
(1) Memory card
(2) Memory card slot
CAUTION
NOTE
NOTE
(2) Removing a memory card
Step 1
Make sure the ACC LED is off (the memory card is not being accessed).
116
Remove the memory card before moving the Switch. If a card is
subjected to excessive force when the Switch is moved, the connector
of the memory card slot might be damaged.
When inserting a memory card, do not push the card too strongly or
flick it with your finger. Doing so might damage the connector of the
memory card slot.
To prevent deleting or writing of data, slide the protection switch to the
Lock position before inserting it.
If the memory card slot is dusty, clean the slot with a dry cloth before
inserting a memory card.