Alaxala AX6300S Series Instruction Manual page 152

4. Installing a Switch
executed) and the memory card is not being accessed.
Figure 4-51 Checking the LED
(1) Management and switching unit
(2) STATUS LED
(3) ACC LED
CAUTION
CAUTION
Step 2
Set all power switches on the Switch to OFF.
128
When the command is executed, the Switch restarts
ppupdate
automatically. Do not turn off the Switch until it is restarted (until the
STATUS LED on the management and switching unit changes from
blinking green to constant green). Failure to do so could result in a
Switch failure.
If the ACC LED is lit, the memory card is being accessed. While a
memory card is being accessed, do not remove the memory card or
turn off the power. Doing so might damage the memory card. In
addition, some commands require a certain amount of time after being
entered to finish accessing the card. Make sure that the memory card
is no longer being accessed before removing the card or turning off
the power.