Step 3
Close the levers of the management and switching unit. (The unit is inserted
completely.)
Figure 5-26 Installing a management and switching unit (3)
(1) Lever
CAUTION
Step 4
Tighten the screws of the management and switching unit.
Figure 5-27 Installing a management and switching unit (4)
(1) Screws
5. Adding and Replacing Optional Modules
Use the levers so that the connectors on the optional module and the
Switch will be engaged correctly.
When moving the levers, move them slowly (one second or longer)
without exerting any force.
Failure to do this could result in a Switch malfunction or fault.
167