4.5 Mounting in a rack
The Switch can be mounted in to a 19-inch cabinet rack that conforms to the EIA
standard.
The procedure for mounting in a rack is described below.
NOTE
4.5.1 AX6304S (when a guide rail or a shelf is used)
Step 1
Attach a guide rail or a shelf to the rack.
For the installation location of the guide rail, see Figure 4-7 Installation location of
the guide rail.
Figure 4-6 Installing a guide rail
(1) Guide rail
It is not possible for the provided rack fixture alone to support the
weight of a Switch. Its purpose is merely to hold a Switch on the rack.
Accordingly, use the following fixtures:
AX6304S: Guide rails, shelves, and support brackets
AX6308S: Guide rails and shelves
You must use the guide rails and shelves provided with the rack, and
these must be able to support the weight of a Switch (with the
maximum number of optional modules installed).
Use a rack facility that satisfies the conditions described in (2) 19-inch
cabinet rack in 2.8 Installation location
4. Installing a Switch
.
95