Alaxala AX6300S Series Instruction Manual page 124

4. Installing a Switch
(2) Screws supplied with the support bracket (Two M4 x 10 screws)
NOTE
Step 3
Mount the Switch on the rack. Hold the handles and the bottom of the Switch, and
then mount the Switch horizontally on the support brackets.
Figure 4-13 Mounting a Switch on the rack
NOTE
100
To attach crossbar A, use the M4 screws supplied with the support
bracket.
The maximum weight of the AX6304S is 45 kg. The Switch must be
installed and carried by at least three people. Installing or carrying a
Switch with too few people could result in the Switch being dropped or
falling, possibly leading to injury.
While supporting the front and the back of the Switch, mount it
horizontally. If the Switch tilts, it could drop or fall, resulting in injury. In
addition, other devices mounted in the same rack might be damaged.
When moving a Switch, do not hold the handle of the fan unit or power
supply unit. The handle might come off, resulting in the Switch falling
and possibly causing injury. Also, the fan unit or power supply unit
might become deformed, resulting in fire or electric shock.
To install a Switch in an elevated location, ALAXALA Networks
Corporation recommend that you use a hand lifter or equivalent
device.