(3) Guide rail
NOTE
Step 3
Secure the Switch to the rack.
Figure 4-9 Mounting a Switch on the rack
(1) Screws (M5 or M6 x 4)
NOTE
4.5.2 AX6304S (when support brackets are used)
The maximum weight of the AX6304S is 45 kg. The Switch must be
installed and carried by at least three people. Installing or carrying a
Switch with too few people could result in the Switch being dropped or
falling, possibly leading to injury.
When moving a Switch, do not hold the handle of the fan unit or power
supply unit. The handle might come off, resulting in the Switch falling
and possibly causing injury. Also, the fan unit or power supply unit
might become deformed, resulting in fire or electric shock.
To install a Switch in an elevated location, ALAXALA Networks
Corporation recommend that you use a hand lifter or equivalent
device.
To secure a Switch to the rack, use the M5 or M6 screws supplied with
the rack.
The support bracket supports the AX6304S only. Do not use the
bracket with another Switch. Using a bracket with another Switch
might cause the Switch to drop or fall, resulting in injury.
When support brackets are used to mount a Switch on a rack, the
weight of the Switch is borne by the rack fixture and the support
brackets only. Securely tighten the screws on the rack fixtures and the
support brackets.
4. Installing a Switch
97