Alaxala AX6300S Series Instruction Manual page 141

Figure 4-36 Checking the ACC LED
CAUTION
Step 2
Push the memory card in until you hear a click (the memory card is ejected slightly).
Figure 4-37 Ejecting a memory card
(1) Memory card
Step 3
Remove the memory card.
If the ACC LED is lit, the memory card is being accessed. While a
memory card is being accessed, do not remove the memory card or
turn off the power. Doing so might damage the memory card. In
addition, some commands require a certain amount of time after being
entered to finish accessing the card. Make sure that the memory card
is no longer being accessed before removing the card or turning off
the power.
4. Installing a Switch
117