(2) Network interface unit (NIF) slot
(3) Rack fixture
(4) Handles
(5) Wrist strap terminal
NOTE
A rack fixture attached to a Switch is used to secure the rack pillars
and the front of the Switch so that they are flat when the Switch is
installed in a rack.
If a 100 mm space cannot be maintained between the rack door and
the front of the Switch, you can use another fixture (sold separately)
that fixes the front of a Switch so that it is recessed 50 mm from a rack
pillar.
For information about this separately sold fixture, see 1.10 Rack
fixture.
Figure 1-8 Rear view (with an AC power supply unit installed)
(1) Power supply unit (PS) slot
(2) Fan unit (FAN) slot
(3) Handles
1. Components Overview
7