Installing A Switch On A Desktop - Alaxala AX6300S Series Instruction Manual

4. Installing a Switch

4.3 Installing a Switch on a desktop

A Switch can be placed on a stable, flat surface.
Rubber pads are attached to the bottom of the Switch when it is shipped from the
factory. When installing a Switch on a desktop, do so without removing the rubber
pads.
When installing the Switch, hold it by the bottom and the handles.
Figure 4-1 Installing a Switch on a desktop
(1) Handles
90
When installing the Switch on a table, position the Switch horizontally
on a worktable strong enough to bear the weight of the Switch. Placing
the Switch in an unstable location, such as on an unsteady or tilting
surface, might cause the Switch to fall, resulting in injury.
The weight of the Switch is shown in the table below. A Switch must
be installed and carried by the number of people shown in the table
below. Using too few people to install or carry the Switch could result
in the Switch being dropped or falling, possibly leading to injury.
Model Weight
AX630 Up to 45 kg
4S
AX630
Up to 64 kg
8S
When moving a Switch, do not hold the handle of the fan unit or power
supply unit. The handle might come off, resulting in the Switch falling
and possibly causing injury. Also, the fan unit or power supply unit
might become deformed, resulting in fire or electric shock.
Number of
people
Three or
more