Alaxala AX6300S Series Instruction Manual page 125

Step 4
Secure the Switch to the rack. Use the screws to secure the Switch to the rack pillar.
Figure 4-14 Securing the Switch
(1) Screws (M5 or M6 x 4) supplied with the rack
NOTE
Step 5
Use thumb screws to secure crossbar B to the bottom of the Switch. Use mounting
hole 1 if a rack fixture attached when the Switch was shipped from the factory is
used, and use mounting hole 2 if the BRK-11 is used.
Support the front and the back of the Switch until the screws have
been tightened. If the Switch tilts, it could drop or fall, resulting in
injury. In addition, other devices mounted in the same rack might be
damaged.
To secure a Switch to the rack, use the M5 or M6 screws supplied with
the rack.
4. Installing a Switch
101