Required Tools - Alaxala AX6300S Series Instruction Manual

4. Installing a Switch

4.1 Required tools

The following tools are necessary to install a Switch:
No. 2 Phillips screwdriver
Required when using M5 screws to replace a rack fixture or mount a Switch
on a rack. This screwdriver is also required when connecting or
disconnecting a DC power cable.
No. 3 Phillips screwdriver
Required when using M6 screws to mount a Switch on a rack. This
screwdriver is also required when connecting or disconnecting a DC power
cable.
Antistatic wrist strap
Used to protect the equipment from electrostatic discharge.
Hand lifter:
Used to install a Switch.
88