Alaxala AX6300S Series Instruction Manual page 193

the operation).
Activate
4. Match the software version used in the standby system with the version used
in the active system (use the
5. Synchronize the configuration, user account, password, and license key
settings of the standby system with the settings of the active system (use the
command).
synchronize
6. When an optional license has been installed, restart the management and
switching unit of the standby system in order to reflect the license key
information (use the
NOTE For details about the Activate and Inactivate operations, see 11 Switch
Management in the Software Manual Configuration Guide Vol. 1.
NOTE For details about the commands to use, see the following manuals:
restore
Status in the Software Manual Operation Command Reference Vol. 1
ppupdate
Operation Command Reference Vol. 1
synchronize
Software Manual Operation Command Reference Vol. 1
reload
Status in the Software Manual Operation Command Reference Vol. 1
5. Adding and Replacing Optional Modules
command).
ppupdate
command).
reload
command: 9. Checking the Software Version and Switch
command: 13. Software update in the Software Manual
command: 29. Making Devices Redundant in the
command: 9. Checking the Software Version and Switch
169