Alaxala AX6300S Series Instruction Manual page 53

Figure 1-26 Front view
(1) STATUS LED
(2) LINK/TR LED
(3) Ethernet port (1000BASE-X)
LED
Table 1-15 LED indications
Name Type
LED: Green,
STATUS
orange, or red
LINK/TR LED: Green or
Orange
#1: A network interface unit can be turned off by the Inactivate operation from the
system operation panel or by entering a command from the operation terminal.
#2: If no system recovery is set, the network interface unit is turned off in the
following situations:
When a failure occurred in the network interface unit (the STATUS LED turns
red, and then it turns off).
When a failure occurred in a management and switching unit (when the
management and switching unit is not duplicated).
#3: When the STATUS LED is green.
#4: Cable disconnection is also included.
#5: Operation of an Ethernet port can be stopped by entering a command from the
operation terminal.
#6: Always turns off if the interface port LED is set to off. When an operation key on
the system operation panel is used, the LED lights up, and the operating status can
be checked. If no keys are used for 60 seconds, the LED turns off again.
Status Description
Indicates the
Green: Operation is possible.
operating status of
Orange: A reset is in progress.
the network
Blinking green: Startup is in progress.
interface unit.
Red: A failure has been detected.
Off: Power is off. (The network
interface unit can be replaced.)
Indicates the Green: A link is established.
operating status of
Blinking green: A frame is being sent
#6
the Ethernet port.
or received.
Orange: A failure has been detected.
Off: A link failure occurred
operation has stopped.
1. Components Overview
#1 #2
#3 #4
or
#3 #5
29