Alaxala AX6300S Series Instruction Manual page 51

Multilayer switches
Hide thumbs Also See for AX6300S Series:
Table of Contents

Advertisement

#6: Always turns off if the interface port LED is set to off. When an operation key on
the system operation panel is used, the LED lights up, and the operating status can
be checked. If no keys are used for 60 seconds, the LED turns off again.
NOTE
(2) NH1G-16S
The NH1G-16S is a network interface unit with the following hardware specification:
Ethernet port (1000BASE-X): 16 ports
NOTE
Front view
The front view is shown below.
For information about LEDs, see Table 1-14 LED indications.
Figure 1-25 Front view
(1) STATUS LED
(2) LINK/TR LED
(3) Ethernet port (1000BASE-X)
LED
Table 1-14 LED indications
Name
STATUS
If no system recovery is set and a failure occurs in a Switch, the
Switch can stay stopped without recovering the failed part.
This function is supported by software version 10.3 and later.
For information about the SFP transceivers supported by the Switch,
see 1.7.1 SFP.
Type
Status
LED: Green,
Indicates the
orange, or red
operating status of
the network
interface unit.
1. Components Overview
Description
Indicates the operating status of the
network interface unit.
Green: Operation is possible.
Orange: A reset is in progress.
Blinking green: Startup is in progress.
Red: A failure has been detected.
Off: Power is off. (The network
interface unit can be replaced.)
#1 #2
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ax63s-h001-50xAx6304sAx6308s

Table of Contents