Alaxala AX6300S Series Instruction Manual page 18

Safety Information
When removing a fan unit, do not place your hands near the fan if it is
rotating.
Immediately after a fan unit is removed, the blades might still be rotating. While the
fan blades are rotating, do no place your hands near them. Doing so might result in
injury. The following label is attached to a fan unit.
Handle the power cable carefully.
Do not place a power cable near a heat-generating apparatus, because the heat
could melt the cable coating, resulting in fire or electric shock.
When plugging or unplugging a power cable from the outlet, always hold the plug,
not the cable itself. Pulling the cable itself might cause the wires to break.
Do not directly touch a Switch if you have a metal allergy.
A Switch is plated with zinc, nickel, or gold. If you are allergic to these metals, do not
directly touch the Switch. Doing so might cause a skin eruption or a rash.
Avoid looking directly at laser beams.
A network interface unit attached with the label below uses a laser beam. Never
look directly into the optical transceiver.
Lithium batteries
A Switch uses a lithium battery for the real-time clock. Mishandling the battery might
cause the battery to generate heat, explode, or catch fire, resulting in injury or fire.
Do not remove the battery from a Switch, disassemble it, heat it to 100
burn it, or allow it to become wet.
Safety-10
o
C or more,