Msu-1A And Msu-1A1 - Alaxala AX6300S Series Instruction Manual

1. Components Overview
NOTE

1.4.1 MSU-1A and MSU-1A1

The MSU-1A and MSU-1A1 management and switching units (standard table size)
are common to the AX6300S series switches.
The MSU-1A and the MSU-1A1 have the following hardware specifications:
Memory card slot: 1 slot
AUX port (RS-232C): 1 port (In the MSU-1A, the AUX port is supported by
software version 10.3 and later.)
CONSOLE port (RS-232C): 1 port
MANAGEMENT port (10BASE-T/100BASE-TX): 1 port
(1) Front view
The front view of the MSU-1A and the MSU-1A1 is shown below.
Figure 1-19 Front view
(1) System operation panel
(2) Memory card slot
(3) AUX port (RS-232C)
(4) CONSOLE port (RS-232C)
(5) MANAGEMENT port (10BASE-T/100BASE-TX)
(6) LEDs
(7) Switches
(2) System operation panel
The figure below shows the external appearance of the system operation panel.
As shown in the figure, the system operation panel has an LCD and three operating
buttons (back, enter, and forward).
The LCD displays information about the Switch.
Pressing the back, enter, or forward button allows you to switch among the menus
18
In a management and switching unit, a flash disk is used as a storage
device for storing base software, configuration information, and log
information.
The number of times the flash disk can be written to is limited and
should be noted during operation.
For detailed notes about writing data to a flash disk, see 11 Switch
Management in the Software Manual Configuration Guide Vol. 1.