Support Bracket; Brk-14 - Alaxala AX6300S Series Instruction Manual

1. Components Overview

1.11 Support bracket

1.11.1 BRK-14

The BRK-14 support brackets are a pair of brackets used for installation of the
AX6304S in a rack.
When the support brackets are used together with the rack fixture, the Switch can
be installed in the rack without using a guide rail.
The support brackets can be used for a 19-inch cabinet rack that conforms to the
EIA standard.
NOTE
(1) External appearance
Figure 1-56 BRK-14
(1) Bracket L
(2) Bracket R
(3) Cross bar A
(4) Cross bar B
(2) Accessories
Screws used to attach crossbar A to the bracket.
Figure 1-57 Screws (M4 x 10, 2 screws)
NOTE
50
The support bracket supports the AX6304S only. Do not use the
bracket with another Switch. Using a bracket with another Switch
might cause the Switch to drop or fall, resulting in injury.
The support brackets can be used with the BRK-11, a rack fixture
(sold separately) that fixes a Switch recessed 50 mm from the rack
pillar.
For information about the BRK-11, see 1.10 Rack fixture.
Mounting a Switch on a rack requires the screws supplied with the
rack.
Have on hand the eight M5 or M6 screws (four for fixing the BRK-14
brackets, and four for fixing the Switch) that were supplied with the
rack.