Alaxala AX6300S Series Instruction Manual page 12

Safety Information
Place an insulation cover over the 0 V and −48 V terminals of a DC power
cable.
Place an insulation cover over the 0 V and −48 V terminals of a DC power cable
before using them. Using the terminals without an insulation cover could result in
fire or electric shock.
Do not use a DC power supply with the cover of the terminal board
removed.
After attaching a power cable, attach the cover to the terminal board when using a
DC power supply. Using the power supply unit without the cover could result in
electric shock.
Do not touch the terminal used to measure voltage.
A power supply unit has a terminal used to measure voltage. This terminal is used
for inspection before the unit is shipped from the factory. Customers must not use
this terminal. In addition, do not insert anything with a narrow tip, such as a pin or
paper clip, into the terminal. Doing so could result in fire or electric shock.
The Switch must be installed and carried by at least three people.
The table below lists the weight of each Switch. A Switch must be installed and
carried by at least three people. Installing or carrying a Switch with too few people
could result in the Switch being dropped or falling, possibly leading to injury.
Number of people required to carry a Switch:
Model
AX6304S
AX6308S
The following label is attached to a Switch.
Safety-4
Weight Number of people
45 kg
Three or more
64 kg