Inserting And Removing Sfp Transceivers - Alaxala AX6300S Series Instruction Manual

4.9 Inserting and removing SFP transceivers

SFP transceivers with a network interface unit attached can be inserted and
removed while the Switch is on.
(1) Inserting an SFP transceiver
Keep the lever upright as shown in the figure, and insert the SFP transceiver until
you hear a click.
Figure 4-39 Inserting an SFP transceiver (upper port)
(1) SFP transceiver
(2) Lever
(3) Ethernet port
NOTE
Figure 4-40 Inserting an SFP transceiver (lower port)
The above figure shows an example for inserting an SFP transceiver
in the upper Ethernet port of the network interface unit. If you want to
insert an SFP transceiver in the lower Ethernet port, turn the SFP
transceiver upside down and install it as shown in the figure below.
4. Installing a Switch
119